
Main Technical Specification (swater cooled, water temperature +25℃, no load )
1. Chamber size | Workspace volume: W 1000 × H 1000 × D 800 mm Exterior size: W 1200 × H 2030 × D 2645 mm (about) |
2.Temperature range | -70c to +150c |
3.Heating up rate | From -40°C to +85°C, average 15°C/min with load 48KG |
4.Cooling down rate | From +85°C down to -40°C, average 15°C/min with load 48KG |
2.Insulation box | ※ wall material: high-quality carbon steel with static color spray ※ inner wall material: SUS304 # matte stainless steel plate ※ Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
3.Door | Single door. Heating wire was installed at the door frames to prevent condensation at low temperatures. |
4. Observation window | Observation window on the door. Multi-layer hollow electro-thermal coating glass can effectively heat insulation and prevent condensation. |
5. Lighting device | One lamp on the observation window |
6. Heater | High-quality nickel-chromium alloy wire electric heater, non-contact control (SRR). |
7. Humidification | Humidifying basin heating and humidifying method; Stainless steel sheathed heater; Heater control: non-contact pulse width modulation, SSR (solid-state relay); Water level control device, heater anti-dry device. |
8. Condensate water outlet | Equipped with condensing water and condensate drainage unit |
9.Cable port | Φ100mm*1 located on both sides(each*1) with rubber stopper and plastic cover |
10.Sample holder | Two layers of stainless steel sample holder, load capacity 30kg/layer |
11. Mobile casters | Containing mobile casters (with goblet) |
12.Electric control box | Total power circuit breaker, over-temperature protection. |
13. Water Pump System | Water pump of automatic water supply |
Ⅷ. Electrical control system | |
1. Control Panel | a. Emergency stop switch b. Power switch c. Over temperature protection device d. RS-485 or RS-232 Interface |
2. Safety protection device | A. Heater dry combustion protection switch B. Humidifier empty burn prevent protection switch C. Heater over-current circuit breaker D. Humidifier over-current circuit breaker E. circulation fan over current overload protection F. Compressor high pressure protection switch G. compressor over temperature protection switch H. compressor over-current protection switch I. Over-voltage open phase, reverse protection switch J. Circuit breaker K. No fuse switch L. Low humidifier protection M. Water tank low water level warning N. Zero-crossing gate fluid power controller |
Applications
Temperature adaptability test under the condition of rapid change, or gradient for electrical, electronic, instruments and other products or spareparts, particularly applies to environmental stress screening test(ESS)
Standards Implemented and met
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Our Services:
We are here to help you.Services available:
Photos show
KOMEG Technology Ind Co., Limited
ABOUT KOMEG
Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.
KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.
KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)
KOMEG also has branch office in Shenzhen.
Our Philosophy
Born for quality, test for future.
Our Aim
Better idea, better design and better quality.
KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.
Our strong R&D team and skilled engineers and workers are the key factors for our success.
No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.
Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.
Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO,
Midea, TCL and Huawei are also among our long-term clients. With
KOMEG top brand strength, renowned reputation domestic and
overseas, our products are widely exported to Europe, America,
Southeast Asia, Africa, Oceania, etc. countries like
Russia, Germany, Korea, Singapore, Brazil, etc.
Distributors welcomed, Inquire today to get your order started.