ESS Testing Water Circuit Seperate High Low Temperature Cycling Chamber​

ESS Testing Water Circuit Seperate Design High Low Temperature Cycling Chamber​

ESS traditionally increases product reliability four times that of unscreened electronics.

What is ESS?

Environmental Stress Screening (ESS) is a means of screening electronic assemblies at the most cost-effective point of manufacture to expose defects that can't be detected by visual inspection or electrical testing. These defects are typically related to defective parts or workmanship and are normally found as early field failures.

1. Explore Temperature Chambers by KOMEG Different Series:

KMT-R Series, KMT-L Series, KMT-S Series

Simulate high and low temperature environments in Associated Environmental Systems bench top or floor model temperature chambers.

1) Working volume from 64 to 1000 cubic L.

2) Conform to commercial and military standards for high and low temperature tests.

3) Self-contained single-stage refrigeration systems support low temperatures to -158°F / -70°C.

4) Two-stage cascade refrigeration systems support low temperatures to -140°F/-60°C. The two separate closed refrigerant circuits each use a different refrigerant with its own compressor.

2. High temperature limits of test chambers

There are many types of test chambers, but they all high and low temperature limits. Let's take a look at the typical high temperatures thresholds and why they exist.

Test chambers usually have wire heaters made of a material called Nichrome. By placing successive loops of heater wire, a greater amount of heat that is generated. The result looks a lot like the inside of a toaster. Fans circulate the air past the heaters, so the samples in the chamber are not exposed to radiant heat. It is very easy to add heaters and increase the speed and / or high limit of a chamber.

KOMEG chambers typically have a high temperature limits under 200°C. Here is a break-down of why a chamber's high temperature limit exists:

150°C: There are two reasons we may limit a chamber to 150°C. First, there may be a limitation of the materials used inside the chamber. Secondly, for extremely fast chambers, we may limit the high temperature to avoid problems with accidentally tripping overheat protection devices.

170-180°C: Most models stop at this temperature range. There is a risk of burning the oil inside the refrigeration's cooling coil.

3. Parameter Specifications:

4. Factory Tour --- Why KOMEG IS Your Right Choice?

Specialized in climatic test chamber since 1990
Main parts are imported famouse brand like Tecumseh, Danfoss, Bizter, ESK,Ranco,Castel,etc.
Passed ,CE,TUV,etc. third party certification
Recognized by Global 500 Enterprises like EMERSON, SIEMENS, Minolta, Epson, HUAWEI, TCL,etc
Environmental friendly, low energy consumption and easy maintenance
High cost-effective and steady delivery time
Experienced and trained staffs assure good service

ABOUT KOMEG
 

Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.

KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.

KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)

KOMEG also has branch office in Shenzhen.

Our Philosophy
Born for quality, test for future.

Our Aim

Better idea, better design and better quality.

KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.

Our strong R&D team and skilled engineers and workers are the key factors for our success.

No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.

Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.

Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO, Midea, TCL and Huawei are also among our long-term clients. With KOMEG top brand strength, renowned reputation domestic and overseas, our products are widely exported to Europe, America, Southeast Asia,  Africa, Oceania, etc. countries like Russia, Germany, Korea, Singapore, Brazil, etc.


Distributors welcomed, Inquire today to get your order started.