Dissolvable Magnesium Alloy Bridge Plug Used In Oil And Gas Industry , Drilling Equipment, Hydraulia Fracturing

A dissolvable magnesium bridge plug is a temporary sealing device used in oil and gas wells to isolate specific sections of the wellbore during operations such as fracturing, cementing, or well testing. It is designed to provide a temporary barrier that can be easily dissolved and removed from the well, eliminating the need for mechanical intervention to retrieve it.

vivian@hbnewmaterial.com

1. Material: Dissolvable magnesium bridge plugs are typically made from a high-purity magnesium alloy. This alloy is selected for its ability to dissolve in downhole fluids, such as brine or acid, at controlled rates.

2. Construction: The bridge plug is designed as a cylindrical or tapered device, resembling a solid rod or cone. It is engineered with specific dimensions and sealing elements to fit and isolate the desired wellbore section.

3. Dissolution Process: When the dissolvable magnesium bridge plug comes into contact with wellbore fluids, the magnesium alloy reacts with the fluid, initiating a controlled corrosion process. This gradually dissolves the bridge plug over a predetermined period, allowing for the restoration of fluid flow.

4. Customization and Dissolution Rates: Dissolvable magnesium bridge plugs can be customized based on wellbore conditions, such as temperature, pressure, and fluid composition. The dissolution rates can be tailored to match the required operational timeline and environmental conditions.

5. Advantages: Using dissolvable magnesium bridge plugs offers several advantages. They eliminate the need for costly and time-consuming interventions to retrieve traditional mechanical bridge plugs. They also minimize the risk of formation damage during plug removal, enhance operational efficiency, and reduce environmental impact.

1. Purpose and scope of application

(1) Staged fracturing of horizontal wells is the main production stimulation measure for the development of low-permeability and unconventional oil and gas resources. Dissolvable Frac Plugs are the main technology for staged fracturing of horizontal wells. With the continuous development of low-grade resources, the length of the horizontal section and the number of fracturing sections continue to increase, and its importance becomes more and more prominent. (2) The main body of the All-Metal Dissolvable Frac Plug is made of high-strength soluble magnesium alloy, and the seals are made of soluble alloy materials, which are suitable for high-temperature or low-temperature oil and gas wells. The pressure-bearing performance of the seal exceeds 70MPa, and the dissolution rate after fracturing is adjustable and controllable.

Applicable wellbore conditions: vertical wells and horizontal wells without direct contact with acidic operating environment

Setting tool model: Baker#10#20 Seating tool

Technical parameters

Max. test pressure: 60-90MPa

Rated working pressure difference: 35/50/70MPa

Max. working temperature: 120°C~160°C

Min. setting load: 100KN

Max. setting load: 140KN

Max. drop load: 140KN

Water-soluble medium: 0.5-2% chloride ion liquid

Sealing stability period: 24 hours

Loss of sealing time: 2-3 days

Completely water-soluble time: 6-10 days

Setting and feeding method: cable or hydraulic feeding

China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.

Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.

Along with strong economic development  in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.

Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..

Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.

Believe we can be your long term and reliable supplier .