Solid Wall Automatic Ppr Pipe Extrusion Machine With 2 Years Warranty

Solid Wall PPR Pipe Extrusion Line , Automatic PPR Pipe Extrusion Machine

PPR pipe introduction:

We designs and develops PPR pipe production line and gas pipe production line by itself. Plastic Pipes that are produced by this line have excellent

stiffness,energy-saving insulation and non-toxic,health performance so on. It has become the first choice for the hot/cold water pipe.

PPR pipe produced from our machine has features as follows:

(1). The pipe is new environmental friendly product.

(2). Has the features of sanitation, non-poison, non-rust, heat resistance and long life.

(3). Mainly used in the fields of water supply and hot water for warm for resident life and industry.

(4). Can replace copper pipe and aluminium pipe.

(5). The machine can be changed to produce PPA/PPC/PP/PE pipe.

Technical Introduction:

Firstly, put PP-R material and other assistant material into the mixer and mixing the material symmetrically, then feed into the hopper, at the same

time heat extruder and keep the temperature,and the material is melt and plasticizing by extruder,then extruded by die and head and goes into

vacuum calibrating device, and cooling and calibrating, then draw-off by haul-off machine, then printing word by ink jet printer, then put into

automatic cuter to finish the automatic cut according to pre-establishing length and stacking into the shelf. And the eligible product is packed and put

into storeroom, and inferior product is crushed and recycled.

This pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine,

cutting machine(or winder) and overturning bracket.

PPR pipe production line, PPR plastic pipe making machine​process:

Material + Color Master-batch → Mixing → Vacuum Loading → Raw Material Drying → Single Screw Extruder → Color Line Extruder → Mold →

Vacuum Forming Tank → Spray Cooling Water Tank → Crawler Haul-Off → Planetary Cutter→ Stacker → Completed Product Inspection &

Packaging

Feeder

The Feeder used to feed material into the extruder, usually using a vacuum feeder to feed pellets into the extruder.

Single Screw Extruder

Usually recommends two single screw extruders in this case: the larger extruder used to extrude the actual pipes while the smaller extruder used to extrude the colored mark line. This is the integral part of the entire extrusion line and Yurefon only uses the finest quality extruders to insure reliability and performance.

Mould (Die Head)

The mould is another essential part of the HDPE extrusion line. Mould defines the shape and diameter of the PE pipes. The quality of the extruded pipes are largely depending on quality of the mold (die head).

Vacuum Calibrating and Cooling Tanks

High quality Vacuum calibration and the cooling tanks give produced PE pipes a better looking exterior. An extra set of vacuum calibrators and cooling tanks are required when extruding pipes with larger diameters.

Water Cooling Tanks

The pipes extruded from the mould (die head) is extremely hot. Even after going through vacuum calibration and the cooling tanks, they will still need to be further cool. The water cooling tanks in this case further cool down the pipe through water. Usually, the larger the diameter of the pipes been extruded, the larger the water-cooling tank will need to be.

Haul-off Unit

The Haul-off unit used to move the pipe forward, the particular make and model of the haul-off unit depends on the quantity of the claws.

Cutter

LB ’s pipe machine cutter completed automated and controlled digitally. The interface designed for ease to use and with great performance in mind.

Winder or Stacker

A winder used in smaller diameter PE pipes production, those small diameter PE pipes are flexible enough to coil around a winder, and thus

essentially allow unlimited length for produced pipe.

A stacker is recommended in larger diameter case, usually above 63 mm, in this case produced PE pipes are stacked together efficiently on stacker, waiting for final packaging and transportation.

COMPANY OVERVIEW

ZHANGJIAGANG LANGBO MACHINERY CO., LTD. is leading company offering quality machinery for a wide range of plastic extrusion and recycling processes from China.

Due to our constant commitment to plastic extrusion and recycling technology, we have emerged as a leading manufacturer of machinery for PVC/PE/PP-R pipe, PE/PP-R composite multi-layer pipe, PVC profile, PVC/PP/PE composite profile, PVC compounding and recycling for PET/PP/PE and other wasted plastics.

Made of quality raw material and using world class technology, our machines are widely appreciated for their salient attributes like efficient and consistent performance, lower power consumption, durability and corrosion resistance. With decades of valuable industry experience, we can deliver quality machinery in both standard and customized specifications.

In the fast-growing competitive market of plastic machinery, we stand out as a growth oriented company that recognizes the needs of the plastic manufacturing industry and provides comprehensive services including machinery operation and maintenance instructions because of we continuously keep an eye on innovation.
We have clientele in both domestic and international markets, and we serve them with unconditional support. Our active research and development enables us to deliver solutions for specific extrusion and recycling needs of clients and scaling newer heights in the plastic industry.

Our mission:

• To optimize our manufacturing capabilities and elevate our position as a leading manufacturer plastic extrusion and recycling machinery.
• To innovate excellent, functional and cost-effective plant for multiple extrusion and recycling processes.
• To provide apt solution for every extrusion and recycling need.

Core Values:

• Constant development
• Need-oriented solution
• Undeterred commitment towards client's satisfaction
• Future readiness