China Categories
All Categories
High UV Radiation And Humidity UV Aging Test Chamber / Rack For Aging Laboratory
Ask Latest Price
Brand Name:ASLI
Model Number:UV-290
Certification:CE , ISO, SGS
Price:negotiate
Payment Terms:T/T, Western Union
Supply Ability:100 sets per month
Delivery Time:25workdays
Company Data
Active Member
Contact Person
Doris
Business Type:
86-769-23164266
Business Type:
Manufacturer
Officials:
No. 7, 1/F, Bldg. C, Jinhui Industrial Park, Jiuxibian Village, Lixin Community, Dongcheng Dist.
Quality:
Quality Certifitation Available
Product Details
Company Profile
Product Details
high UV radiation and humidity UV Degradation chamber/Rack for aging laboratory
UV Aging Test Chambe for PV Module purpose
To precondition the module with ultra-violet (UV) radiation before
the thermal cycle/humidity freeze tests to identify those materials
and adhesive bonds that are susceptible to UV degradation
UV Aging Test chamber for pv module apparatus
1.A temperature -controlled test chamber with a window or fixtures
for a UV light source and the module under test. The chamber shall
be capable of maintaining the module temperature at 60±5ºC
2.A means for monitoring the temperature of the module to an
accuracy of ±2.0ºC and repeatability of ±0.5ºC. the temperature
sensors shall be attached to the front or back surface of the
module near the middle without obstructing any of the UV light
incident on the active cells within the module. If more than one
module is tested simultaneously, it will suffice to monitor the
temperature of one representative sample
3.Instrumentation capable of measuring the irradiance of the UV light produced by the UV light source at the test plane of the module, within the wavelength ranges of 280nm to 320nm and 320nm to 400nm with an unceratinly of ±15% or better
4.A UV light source capable of producing UV radiation with an irradiance uniformity of ±15% over the test plane of the module with no appreciable irradiance at wavelengths below 280nm and capable of providing the necessary total irradiance in the different spectral regions of interest
5.For light sources with a negligible spectral content in the
visible range the module shall be short circuited. Alternatively
the module can be connected to a load sized such that the module
will operate near the maximum power point . the latter is
recommended for light sources emitting a significant portion of
light in the visible spectrum where the module exhibits a power
equal to or large than20% of its STC measured power
UV aging test chamber procudrue
1.Using the calibrated radiometer measure the irradiance at
proposed module test plane and ensure that at wavelengths between
280nm and 400nm it does not exceed 250w/m2 (i.e. about five times
the natural sunlight level) and that it has a uniformity of ±15%
over the test plane
2.Short-cicuit or attach the resistive load to the module and mount it in the test plane at the location selected in a 1), normal to the UV irradiance beam , make sure that the module temperature sensors read 60±5ºC
3.Subject the module front side to a total UV irradiation of at least 15KW/m2 in the wavelength range between 280nm and 400nm with at least 3% , but not more than 10% in the wavelength and between 280nm and 320nm ,while maintaining the module temperature within the prescribed range
high UV radiation and humidity UV Degradation chamber/Rack for
aging laboratory Technical Parameters
Model | UV-290 | |
Internal Dimension WxHxD (mm) | 1150x500x500 | |
External Dimension WxHxD (mm) | 1400x1600x750 | |
Applicable Standard | GB/T16422,GB/T5170.9 | |
Temperature Range | R.T.+15°C~+70°C | |
Temperature Fluctuation | ±0.5°C | |
Humidity Range | ≥95%R.H. | |
Environmental Temperature for Use | +5°C~+35°C | |
Test Light Source | UVA,UVB UV light | |
Wave Length of Test light Source (nm) | 280~400 | |
Center Distance between Sample and Tube (mm) | 50±2 | |
Center Distance Between Tubes (mm) | 75±2 | |
Material of Internal Case | Stainless steel with sanding polish | |
Material of External Case | Stainless steel with sanding polish or painting coated | |
Heating and Humidifier | Electric-heat type steam generator ,heating and humidification | |
Safety System | Operation Interface | Digital smarts touch key input (Programmable) |
Running Mode | Program/constant running type | |
Input | Black panel thermometer.PT-100 Sensor | |
Standard Configuration | 1 pc Stainless steel shelves | |
Safety Configuration | Protection of electric leakage, power outage when over-load, over-temperature protection, water short storage, ground lead protection | |
Power | AC220V 1 phase 3 lines, 50HZ | |
 | |
Product Description
uv irradiation chambers can simulate the sun, rain and dew to damage the material,the machine using UV lamp simulate the effect of sunlight, cold rain and dew. Being tested materials are placed in a certain environment which the light and moisture are alternating. The materials are tested for several days or weeks, you can know the damage of material at outside for several months or several years, Damage types include: bleaching, discoloration, loss of light, powder, crack, turbidity, bubble-based, embrittlement, strength decline and oxidation.
Corresponding standard:
Accord with ASTMG53-77, GB,GJB,MIL,ASTM,CNS,IEC,JIS,AATCC,DIN,Fed
Test,BS,SAE
Applicable industries:
accelerated weather tests is widely used in paint, resins,
plastics, printing and packaging,aluminum, adhesives, auto,
cosmetics, metals, electronics, electroplating, medicine, etc.
Product Pictures
Acceleration Stability Chamber with UV and Photostability Requirement for Plastic
Company Profile
ASLi (CHINA) TEST EQUIPMENT CO., LTD
ASLi (China) Test Equipment Co., Ltd is authenticated by competent testing centers, including the National Measurement andTestingCenterand South China Center of Metrology. Famous for precision and reliability, these products have been extensively used within the industry, by research institutions, quality inspection agencies, and colleges and universities both at home and abroad, serving a worldwide customer base.
With unmatched quality advantage, a dynamic management team, professional customer services, superb manufacturing techniques and innovative research and development ideas, ASLi (China) Test Equipment Co., Ltd, supported by an international, standard and professional quality policy, is gradually becoming an international brand. Its products are manufactured in consistent with a number of world standards, IE, ISO, ASMT, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA and CEN.
Send your message to this supplier
You May Like
Accelerated Weathering UV Aging Test Chamber / UV Resistant Test Machine
Accelerated weathering UV aging test chamber environmental simulated chamber
Sun Light Simulation UV Weather Resistance Test Chamber Tesing Nonmetallic Materials
UVA UVB Light Programmable UV Aging Test Chamber
Accelerated Aging Test Chamber / Xenon Lamp uv Weathering Resistance Test Chamber
Stainless Steel Touch Screen Programmable UV Aging Test Chamber AC220V
Programmable UV Aging Test Chamber CE Appproved , 280~400nm Wave
Professional UV Weathering Test Chamber / UV Accelerated Weathering Tester
UV Weather resistant aging test chamber / UV Lamp Anti-yellow Aging Test Chamber
Programmable Rubber Aging UV Weathering Test Chamber , UV Light Testing Equipment
Simulate Xenon Lamp Light Fastness Climate UV Aging Test Chamber
Inquiry Cart
0