Ppgi / Gi Roof Tile Manufacturing Machine Material Width 1220mm 18 Rollers

Rib 40 MM Glazed Tile Roll Forming Machine Material Width 1220 mm PPGI And GI

Details

Steel tile press automatic control system

1. Inverter controls the host's positive and negative running, and its speed can be controlled by the high-speed/low-speed switch on the panel. Always set the speed switch to high speed in automatic operation.

2. The oil pump switch is used to control the start and stop of the oil pump. Automatically start the oil pump to provide pressure for the hydraulic system. The forward and backward movement of the oil pump is controlled by the inverter to control the positive and negative running of the main engine. Its speed can be controlled by the high-speed/low-speed switch on the panel. Always set the speed switch to high speed in automatic operation.

3. The oil pump switch is used to control the start and stop of the oil pump. Before starting operation, turn on the oil pump to provide pressure for the hydraulic system. After the oil pump is running, pay attention to whether the pump running direction is consistent with the direction of the arrow. If not, change any three of the three phases in the pump motor.

4. The lower cut and return buttons control the operation of the cutter. If you press the cut, return button are invalid, generally should consider whether the oil level of the hydraulic tank is too low, should be no tank to add hydraulic oil. In addition, during the cutting and returning of the cutter, the limit switch operation in front of the cutter will automatically stop.

Q & A

What does the single pulse length of the tile press mean and what does it do? Why is my machine measuring length and display length different?

If the setting value is not changed, the size of the plate produced many times is the same (do not try to intervene manually). The pulse coefficient can be adjusted.

If the size of each plate is different:

1. Counter, the wheels are not installed, there are thrown and skid and dangle.

2. If there is no problem checking "Problem 1", the counter may be damaged.

Detection method: Remove the counter, turn the hand 10 times, check the value, and record the value.

What is the reason why the automatic steel tile cutter cannot lift after being cut off?

1 See the oil pump filter is plugged

2 See if the oil pump and motor connection keys are broken.

3 The solenoid valve is stuck and does not change direction.

About color steel tile cutter cutting fault and solution:

1. The knife keeps going down and the pump is blocked:

(1) The adjustment of the lower limit is improper or the switch is damaged.

(2) The solenoid valve is stuck. Turn off the oil pump, and press the knife to cut off the knife. When you hear the “click” sound, turn on the pump to raise the knife to the upper limit position.

2 The knife keeps going up and the pump is blocked:

(1) The upper limit is improperly adjusted or the switch is damaged. .

(2) K1 and K2 are reversed.

(3) The solenoid valve is stuck. Turn off the oil pump and press the knife to cut off the knife. When you hear the sound of “click”, turn on the pump and raise the knife to the upper limit position.

Our factory was founded in 1998. We have been engaged in the roll forming machine manufacturing industry over 25 years.

Main products are color steel roll forming machine, classical glazed tile forming machine, C/Z purlin roll forming machine, gutter machine, ridge cap machine, keel roll forming machine for light steel structure building, floor deck forming machine, sandwich panel production line, guardrail roll forming line; and various kinds full-automatic cold roll forming line such as cable trey production line, double C bugging rack beam production line; and other roofing machine line, like stone caoted roofing sheet prodction line.

And our factory has more than 15 years of export experience. we already sold to more than 100 countries and regions in the world. We have a deep understanding of the profiles used in each country and provide high-quality suggestions for subsequent customers' purchases.

In the production of machines, from parts processing and welding to assembly, we have strict quality control in every step. We must be responsible to every customer.
we were and continue always keep: "not only complete a machine, but also perfect every detail".

We have approved certification of CE, the concept “control every process and perfect all products” is curved in everyone’s mind. Each machine will be via testing before leaving factory, problem machines will never be delivered to customer.
We have more than 15 years experience of export and know very well about the different needs of customers from both in developing countries and developed countries, and provide a large number of customers with satisfactory design plan. Now our products have been exported to more than100 countries and regions of the world, and established a long-term cooperative relationship with clients. We do firmly believe a true partnership never ends with the delivery of the goods and satisfactory after-sales service can make a great difference.
We are willing to promote the economic and technical exchanges with the world, and do positive work to enhance the friendship between people from different countries. We sincerely hope: you and I hand in hand, create the glorious future altogether!

Choose Cangzhou Huachen Roll Forming Machinery Co.,Ltd is worth your trust.
We manufacture high standard roll forming machine for export for nearly 15 years.

Our machines have been exported to more than 100 countries and regions around the world.
Maintained good cooperative relations with customers.