Laboratory Environmental Salt Spray and Salt Mist Corrosion Test Chamber with Power 1φ,220V/50HZ

1. Anti-corrosion, easy clean.

2. Durable quality for salt spray test.

Salt Spray Test Chamber / Testing Machine adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, after these anti-corrosive treatment to test the corrosion resistance of their products.

Specifications:

The table parameters for the company Standard Model parameters, we support customer customization parameters

Structure Of Salt Spray Test Chamber / Testing Machine:

1. The Salt Spray Chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.

2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.

3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.

Control System:

High precision P.I.D.temperature control meter with its error ±0.1°C.

Maintenance Procedure:

1. Ensure the test quality, please replace the glass nozzle periodically within 4500 hours.

2. Clean the inner of the chamber and release the water in heat sink if a longer time interval from the next test.

Release the water from heat sink:open the drain value.
Release the water from isolation tank:pulled up the middle silicone plug.

Release the water from preheat tank:Pull out the internal silicone plug.

3. Don’t use the salt solution if unused for a week, avoid affecting the test quality.

4. Change the heat sink water if the test period over one month.

Salt Spray Test Chamber / Testing Machine View:

All of our products can be customized to meet your requirements,and before send our quotation for you, we will be appreciated if you can provide the information as below