Climatic Thermal Shock Chamber High Temperature Range 60 Deg C To 150 Deg C

High Efficiently 3 Test Chambers Climatic Thermal Shock Environmental Chamber

Product Name: Thermal shock chamber

1 Model:TS-49-A

A. Temperature range of high & low temperature storage zone:
1.High temperature storage zone : RT to 150 Deg C
2.Low temperature storage zone : RT to - 40 Deg C

B. Temperature range of testing zone:

1.high temperature range : 60DegC to 150 Deg C

2.low temperature range : -10 to -40Deg C

C. Analysis accuracy : 0.5 Deg C

D. Control accuracy : (+/-)0.5 Deg C ; uniformity : (+/-)2.5 Deg C% (100 Deg C); (+/-)3.5 Deg C%(150 Deg C)

E. Heating time of Heat-Storing zone: RT~150 Deg C,approx30mins

F. Cooling time of cooling-storing zone: RT~ -40 Deg C,approx 30 mins

G. Temperature Recovery Time of testing zone: ≦ 5 mins (high or low temperature (constant temperature)
shock time above 30 mins )

H. Machine's structure and material:

1.TS-49-A

Interior dimension : 400 X350 X 350 MM (W x H x D)
Exterior dimension:1400 X 1800 X 1400MM (W x H x D)

3. Structure:high temperature zone, low temperature zone, testing zone

4. Internal material : SUS#304 hardy heat-resistant stainless steel

5. Outter shell material : SUS#304 SUS#304 hardy heat-resistant stainless steel

Testing Specific:

GB/T 2431.1-2001 Testing A: Low temperature testing method
GB/T 2431.2-2001 Testing B: High temperature testing method
GJB 150.3-1986: High temperature
GJB 150.4-1986: Low temperature
IEC68-2-1 Test A: Cold
IEC68-2-2 Test A: Dry
GB 11158 High and low temperature test term
GB/T 2423.2 << Electrolic products basic environmental test: B: high temperature method>>

Screen display:

1: No key input, direct touch screen option.

2: Setting (SV) and the actual (PV) values directly displayed.

3: Can display the remaining time and cycles
4: Accumulated time function
5: A separate program editing screen, each page can enter a temperature and time paragraphs
6: English and Chinese version.

7: Failure remind screen.

8: Can be used to adjust the screen backlight
9: Screen protection function can be used for timing, TIMER or manually off setting

Saftey device:

1 Cooling System: Compressor heat loading or cold over loading warming
2 Testing room: Testing room and Humidifier temperature over loading warming.

3 Others: Leakage protection. Heating, dry protection. Overload, short circuit protection.Power protection

Cooling system and temperature control:

1.Working way: Size selection for machine model; the cascade of mechanical refrigeration; water-cooling
(users should prepare the cooling water tower)

2.Refrigeration Compressors: Imported famous brand low efficiency hermetic or semi-hermetic compressors.

3.Evaporator: Fin-type multi-stage automatic load capacity adjustment evaporator.

4.Condenser: Shell and tube heat dissipation condensation.

5. System expansion: Refrigeration system capacity control purposes

6. Cooled heat exchanger: Made in Taiwan ultra-high efficiency stainless steel plate.

7. Cooled machine control mode: Control system controller automatically adjusts the cooled operating
conditions based on test conditions than the traditional design, control stability and reproducibility of
high power and achieve effectiveness. Return air compressor cooling circuit

8. Refrigerant and refrigeration piping: R22, R-23, R404A, Environmental Protection; indices are zero
ozone depletion refrigerant pipes have automatic and manual defrost function

ASLi (China) Test Equipment Co., Ltd is authenticated by competent testing centers, including the National Measurement andTestingCenterand South China Center of Metrology. Famous for precision and reliability, these products have been extensively used within the industry, by research institutions, quality inspection agencies, and colleges and universities both at home and abroad, serving a worldwide customer base.

With unmatched quality advantage, a dynamic management team, professional customer services, superb manufacturing techniques and innovative research and development ideas, ASLi (China) Test Equipment Co., Ltd, supported by an international, standard and professional quality policy, is gradually becoming an international brand. Its products are manufactured in consistent with a number of world standards, IE, ISO, ASMT, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA and CEN.