
Lab Ozone Aging Test Chamber , Air or Water Cooled Environmental Testing Chamber
Applications:
Ozone endurance test machine is mainly suitable for polymer materials and products (rubber) of the resistance to ozone aging performance test. Ozone content in the atmosphere is very low, but it is the main factors of polymer materials aging. Ozone aging test chamber simulating and strengthen the ozone condition in the atmosphere, get approximate to actual use or reproduction of the test results in a short time. The studay of ozone effect regulation to rubber products, quickly identify and evaluate rubber materials resistance to ozone and antiozonant protection efficiency method,and then take effective aging proof measures to improve the service life of rubber products.
Main features:
Ozone endurance test chamber Equiped by the occurrence of silent and efficient ozone generator ozone gas, and a certain amount of air processed, the switch in the mixture into the chamber, the continuous line UV detector to detect the concentration of ozone, ozone generator control feedback to the systems to control system settings according to the occurrence of effective control of ozone to the ozone chamber to maintain the appropriate concentration of work by heating humidification systems to meet all the test conditions.
Parameter Specifications
KMH-R series | ||||||
Model | KMH-R series | |||||
150R | 225R | 408R | 800R | 1000R | ||
Temp. range | -20°C ~150°C | |||||
Interior size | W(mm) | 600 | 700 | 700 | 1000 | 1000 |
H(mm) | 600 | 700 | 750 | 1000 | 1000 | |
D(mm) | 460 | 480 | 800 | 800 | 1000 | |
Exterior size | W(mm) | 880 | 980 | 980 | 1280 | 1280 |
H(mm) | 1730 | 1890 | 1940 | 2160 | 2160 | |
D(mm) | 1400 | 1460 | 1740 | 1750 | 1950 | |
Power(KW) | 5.8 | 6 | 7.5 | 12.8 | 12.8 | |
Weight(KG) | 240 | 280 | 400 | 500 | 580 | |
Humidity uniformity | ±3.0%R.H | ±5.0%R.H | ||||
Heat up time | -20°C ~+100°C ,within 35 min | |||||
Pull down time | +20°C ~-20°C , within 45 min | |||||
Humidity Range | 20~98%R.H | |||||
Temp. constancy | ±0.5ºC | |||||
Humidity constancy | ±2.5%R.H | |||||
Temp. uniformity | ±2.0ºC | |||||
Safety device (standard) | NFB, over pressure,over heat and over current protection for compressor, Over temp. protect, over load protect of blower, dry heat protection | |||||
Interior material | Stainless Steel Plate(SUS 304) | |||||
Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | |||||
Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | |||||
Ambient Temp. | +5°C ~+35°C | |||||
Wiring method | AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires | |||||
Controller | LCD Touch Screen, Chinese or English display selectable | |||||
Operation model :Program or fix point running | ||||||
Memory capacity :120programs,1200steps, | ||||||
All repeat 999 cycles, part repeat 99 cycles |
Secifications ( at +20℃ room temp. Or+25℃ water temp with empty load) | |||||
Model | KMH-L series | ||||
KMH-150L | KMH-225L | KMH-408L | KMH-800L | KMH-1000L | |
Interrior material(cm) | 60*60*46 | 70*70*48 | 70*75*80 | 100*100*80 | 100*100*100 |
Exterrior material(cm) | 88*173*140 | 98*189*146 | 98*194*174 | 128*216*175 | 128*216*195 |
Weight(Kg) | 250 | 300 | 420 | 530 | 600 |
Equipment power(KW) | 7.5 | 7.5 | 8.5 | 14.5 | 14.5 |
Tempeture range | -40 ℃ ~ +150 ℃ | ||||
Humidity range | 20 ~ 98%R.H | ||||
Tempeture constancy | ±0.5℃ | ||||
Humidity constancy | ±2.5% R.H | ||||
Tempeture uniformity | ±2.0 ℃ | ||||
Humidity uniformity | ±3.0% R.H(>75%) ±5.0% R.H (≤75%) | ||||
Heating rate | -40℃~+100℃ Within 45 minutes | ||||
Cooling rate | +20℃~-40℃ Within 60 minutes | ||||
Controllor | Touch screen controller English menu Operation mode:setting or program | ||||
Refrigeration system | Air cooled (Water Cooled Type is option) | ||||
Hermetic compressor, stage refrigeration system | |||||
Interior material | Stainless Steel Plate ( SUS 304 ) | ||||
Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | ||||
Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | ||||
System | Balanced & Humidity Control System | ||||
Wiring method | AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires | ||||
Note: 1. We reserve the right to change specifications without
prior notice 2. Customized sizes and configurations available |
Technical parameters: | |||||
Environmental Temperature and Humidity Chamber | |||||
Secifications ( at +20°C room temp. Or+25°C water temp with empty load) | |||||
Model | KMH-S series | ||||
225S | 408S | 800S | 1000S | ||
Interior sizel | W(mm) | 700 | 700 | 1000 | 1000 |
H(mm) | 700 | 750 | 1000 | 1000 | |
D(mm) | 480 | 800 | 800 | 1000 | |
Exterior size | W(mm) | 980 | 980 | 1280 | 1280 |
H(mm) | 1890 | 1940 | 2160 | 2160 | |
D(mm) | 1460 | 1740 | 1750 | 1950 | |
Weight(KG) | 330 | 450 | 550 | 650 | |
Temp. range | -70 °C ~+150°C | ||||
Humidity Range | 20 ~ 98&R.H. | ||||
Temp. constancy | ±0.5ºC | ||||
Humidity constancy | ±2.5%R.H | ||||
Humidity uniformity | ±3.0%R.H | ±5.0 % R.H | |||
Heat up time | -70°C ~ +100°C , within 60 min | ||||
Pull down time | +20°C ~ -70°C , within 80 min | ||||
Equipment Power | 9.5KW | 10.6KW | 18.5KW | 18.5KW | |
Ambient Temp. | 5ºC ~+35ºC | ||||
Standard accessories | Sight window*1, cable port(port 50mm)*1, shelves*2, chamber lamp*1, power cable *2m | ||||
Safety device (standard) | No fuse breaker, over pressure over heat and over current protection for compressor, | ||||
Over temp. protect, over load protect of blower, dry heat protection | |||||
Control System | Balanced Temperature & Humidity Control System | ||||
Refrigeration system | Air Cooled (Water Cooled Type is option) | ||||
Hermetic compressor,Cascsde Refrigeration | |||||
CFC-Free refrigerant(HFC-507/HFC-23) | |||||
Controller | Panel:7-inch LCD Touch panel, Chinese or English display selectable | ||||
Operation model :Program or fix point running | |||||
Memory capacity :120programs,1200steps, | |||||
All repeat 999 cycles, part repeat 99 cycles | |||||
Interior material | Stainless Steel Plate ( SUS 304 ) | ||||
Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | ||||
Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | ||||
System | Balanced & Humidity Control System | ||||
Wiring method | AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires | ||||
Note: 1. We reserve the right to change specifications without
prior notice 2. Customized sizes and configurations available |
Company information
Being a first-class supplier and reliable partner, we are certified
to ISO 9001 and got CE approval for all our products. All equipment
are 7 x 24 hours tested before delivery. That explains why Komeg is
the private brand of choice for many well-known brand enterprises,
and also one of the very few designated suppliers who were
recognized by many top 500 enterprises. Let Komeg's 26 years of
professional experience work for you too.
1. Dedicate touch and excellent user experience
2. Unique and compact design, top grade appearance, stable
performance and easy operation
3. Can simulate a wide range of temperature and humidity
environments
4. Capable of testing large components, assemblies and finished
products
5. Customized sizes and configurations available
6. One year warranties
Besides this, we have a lot of other chamber for your reference:
3-zone/ 2-zone Thermal Shock Chamber
Walk-in Constant Temp. And Humidity Chamber
Rapid Temp. Change Chamber
Precise Drying Test Chamber
Temperature/ humidity/ vibration three integrated Chamber
Precise Drying Chamber
Vacuum oven/ no oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt spray Chamber
Vibration Testing Machine( mechanical and electromagnetic)
FAQ
Q1: What is the Warranty for the accelerated aging machine ?
A1: For the accelerated aging machine, we offer 1 years warranty service. If any quality problems on our side occured in this period ,we will send you replacement and cover the cost of shipping and component parts.
Q2: What's the delivery term?
A2: Usually, it takes us 20 - 25 days after order confirmation to produce the equipment and a little bit longer for customization service. While if you are in urgent need, we can make special arrangement to speed up the proceedings. Then we start the shipped by sea, by air freight or by air express.
Q3:What’s the payment term?
A3: T/T, L/C and other payment terms could be negotiated.
Q4:Is it ok for customization service?
A4: Yes, the inner chamber dimensions, structure, color, some special parameters can be customized as per your specific request.