
High-Performance ESS Chamber Rapid Temperature Change Climatic Test Chamber
Applications :
This series of temperature and humidity test chamber fit for
liability testings for industrial products with high accuracy and a
wide range of temperature and humidity control. Performance of this
device is fit for the requirement of GB5170.2.3.5.6-95, “standard
requirements of environmental testing equipment and test methods
for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and
constant heat”
Specifications:
1. We are manufacturer, offer a reasonable price.
2. LCD touch screen controller.
3. With USB and RS-232 interface.
4. Free parts warranty for 12 months.
Specifications | Note: 1. We reserve the right to change specifications without
prior notice 2.Customized sizes and configurations available | ||||||||||||
Model | ESS-SL | ESS-LL | |||||||||||
225 SL5 | 225 SL10 | 408 SL5 | 408 SL10 | 1000 SL5 | 1000 SL10 | 1000S L15 | 225 LL5 | 225LL10 | 408 LL5 | 408 LL10 | 1000LL5 | 1000LL10 | |
Working Chamber Volume(L) | 225 | 408 | 1000 | 225 | 408 | 1000 | |||||||
Temp Rate of Change( ℃/Min) | 5 | 10 | 5 | 10 | 5 | 10 | 15 | 5 | 10 | 5 | 10 | 5 | 10 |
Performance | -70℃~+100℃ | -70℃~+ 100℃ | |||||||||||
Rapid Temp Change -55℃~+85℃ Full Linear Control | Rapid Temp Change - 40℃~+85℃ Full Linear Control | ||||||||||||
Humidity Constancy | ±0.5℃ | ||||||||||||
Temp Constancy | ±3.0℃ | ||||||||||||
Exterior Material | Cold-rolled steel sheet (Rustproof & Plastic Spray treated )/ Stainless Steel | ||||||||||||
Interior Material | Stainless Steel Plate(SUS 304) | ||||||||||||
Insulation Material | Rigid Polyurethane Foam | ||||||||||||
Safety Devices | overpressure,overheat and over current protection for compressor, over temp. protection, | ||||||||||||
Compressor | Semi-Hermetic Compressor | ||||||||||||
Cooling Mode | Water Cooled | ||||||||||||
Control system | Balanced Temperature & Humidity Control System(BTC type) | ||||||||||||
Heater | Iron-chrome wire heater | ||||||||||||
Blower | Centrifugal Blower | ||||||||||||
Observation Window | Glass incorporating heat generator | ||||||||||||
Temp Sensor | Pt-100 | ||||||||||||
Controller | Touch screen programmable controller | ||||||||||||
Ambient Temp. | +5℃~+35℃ | ||||||||||||
Power | AC 380V/50Hz 3phase 5 wires+ ground wire | ||||||||||||
Note: 1. We reserve the right to change specifications without
prior notice 2. Customized sizes and configurations available |
Packing Details:
We use PP Film wrapping the test chamber to protect the test
chamber from moisture or being scratched first, then use strong
plywood case for easy load and transport, and to keep the chambers
from potential crash or impact.
Features:
1. Automatic adding water function, and automatic filling water upon the water short storage while testing.
2. Automatic operation to test process finished, easy to use.
3.Temperature control: LED digital temperature controller can make
accurate testing of temperature setting, control, and display.
4. LED digital timer, when the inner box's temperature reached the
setting value, then start to time to ensure the test complete.
5. Accurate pressure: temperature chart always shows the inner
box's pressure and relative humidity.
6. Water device is automatically discharged not saturated steam in
order to achieve the best steam quality.
7. An integrated silica gel door gasket, air tightness is very
good, and long operation life.
8. The inner box is mirror-polished, graceful and non-pollution.
After-sale Service:
If you face any problems in future during the testing process we
promise we will give you a reply within 48 hours and the solution
provide within 3 working days. We can offer operation video and
English operation manual. We can provide video-conference. If
customers require on-site service, the transport and travel expense
shall be borne by customer.
KOMEG Technology Ind Co., Limited
ABOUT KOMEG
Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.
KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.
KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)
KOMEG also has branch office in Shenzhen.
Our Philosophy
Born for quality, test for future.
Our Aim
Better idea, better design and better quality.
KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.
Our strong R&D team and skilled engineers and workers are the key factors for our success.
No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.
Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.
Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO,
Midea, TCL and Huawei are also among our long-term clients. With
KOMEG top brand strength, renowned reputation domestic and
overseas, our products are widely exported to Europe, America,
Southeast Asia, Africa, Oceania, etc. countries like
Russia, Germany, Korea, Singapore, Brazil, etc.
Distributors welcomed, Inquire today to get your order started.