
Straw Particle Board Production Line Laminating Making Machine
1. Product Introduction
straw board machine mainly produce different kinds of sheets, which can be used for ceiling, wall skirting, decorating of indoor walls and lining panels for furniture. Also can replace three-ply sheet, five-ply sheet, flakesheet, MDF (Medium Density Fibersheet ) and Gypsum Sheets.
2. Raw material and cost analysis
The wheat straw board is made of filling materials, such as sawdust and all kinds of crushed plant straw (you can select any one kind ) and several chemical raw materials which are token as modified material after special technology. The board has such features: quickly hard, high strength, large format, fireproofing, dampproof and good waterproof performance. It can be nailed, planed and sticked. The machine can be adjusted arbitrarily, and then produce the board with the thickness of 2-60mm, the biggest width of 1, 300mm and unlimited length. So you can adjust the thickness of board at will.
Names of materials | Each dosage |
Magnesium | 2.978yuan |
Magnesium chloride | 1.23yuan |
Non-wovens | 0.85yuan |
Glass cloth | 1.05yuan |
Perlite | 0.62yuan |
Sawdust | 0.647yuan |
Take 1200mm*2400mm*8mm Glass magnesium board an example in china.
3. Technology features
There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding
under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste
materials and waste gas during its production processing. The finished board
don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.
4. Equipment Model and Product Specification
1. rice straw/rice hust material
2. new economic board
3. 1220x2440mm size
4. thickness 5-25mm
4x8' feet Rice straw/rice husk board making
Technical Index for finished board | 1. Oxygenic index%: 90 2. Level combustion: SO 3. Vertical combustion: SO 4. Water content rate: 10.9% 5. Capacity: 1.15g/cm3 6. Static bending intensity: 169.46Mpa 7. Density: T/ m31.13 8. Water resistance: Without chalking for 24 hours and there is no change on surface 9. No Threewastes (waste water, waste gas and waste residue), no pollution and environmental protection. |
straw Board can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture.It can replace three-ply
board, five-ply board, flakeboard, MDF (Medium Density Fiberboard )
and Gypsum Board.
5. After-sale
After purchased the equipment, we will teach relevant technology for free, and
will go to your factory for installation and testing until you can produce the
qualified product by yourself. Our company will train 2-3 technical personnel
for free until he can get the skill. We will take responsibility for provide technical consultation and following-up service for a long time, the equipment warranty
period is one year.
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd
Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new
and high technology enterprise registered at provincial industrial
and commercial department and a modern group enterprise integrated
with scientific research, processing and trade mainly focus on
research, development and popularization of decorating technique,
building materials technology and machinery. Its many patent
products were sold throughout China and some were exported to
Russia, Southeast Asia, Hong Kong and Taiwan. We have had rich
assets and intellectual property rights after many years, and in
July 2004, our products were awarded as many laurels such as State
Key New Product by State Ministry of Science and Technology,
Ministry of Commerce, General Administration of Quality
Supervision, Inspection and Quarantine and State Environmental
Protection Administration. With this company got much economic
benefit and social benefit, so it enjoys high popularity and good
credit in the society. The company is composed of Machinery
Factory, Technology Development Center, Decorating Materials
Factory, Handicraft Development Center and Research Institute of
Paint and Coatings, and it establishes cooperative relationship
with Higher Educational Institutions and Scientific Research
Academy in Beijing and Shandong. With perfect scientific research
production base, rich material conditions and technical force and
acute market feeling, the company reformed boldly and strengthened
exchange and cooperation with the world, and at the same time made
its technology and equipment always meet requirements of changing
market. The above let this company ranks as a leading enterprise in
the same industry. In the information times filled with opportunity
and challenge, all employers of our company will abide by the
management ideas of “Take Market as Principle, Take Scientific
Technology as Forerunner” and carry forward the company spirit of
“Only Innovation can bring competitive power and vitality”, to work
towards to key technological breakthroughs and develop industry,
and will exploit, develop and create wonderful tomorrow together
with all friends on the new and high technology road.