
Cold Storage Room Metal Sandwich Panels Warehouse Pu Sandwich Panel
1. EPS sandwich panel is made of two layer color coated steel sheet
and an EPS layer in the middle.
2. EPS sandwich panels are flush shapes&peak and valley shapes
available. The joint connection can be teeth shape and clip shape.
3. Thickness(mm) of sandwich panel: 20, 40, 50, 75, 100, 150, 200.
4. Length of sandwich panel: Depend on the construction demand and
generally it is less than 12000mm.
Color steel EPS sandwich panel
It is made of e expandable polystyrene (EPS) foam board with two sides galvanized steel plate covered. The surface can be made one side flat, other side corrugated for roofing or both sides flat for wall. It is now widely used in large-span factory, purification plant, villas.
950 wall sandwich panel | ||
Type | EPS sandwich panel (self-insert connection) All the screw and accessories are available | |
Dimensions | Total thickness | 50,75,100,150,200mm |
Width | 950mm ,1150mm | |
Length | Less than 11.8m | |
External face | Material | Galvanized |
Thickness | 0.15-0.8mm | |
Thickness of the zinc | 80g/m2 | |
Corrosion protection | Galvanized | |
Coating | Polyester | |
Thickness of coating | 20 micron | |
Color | According to the RAL | |
Pattern | Nearly Plain | |
Insulation | Material | EPS |
Thickness | 50,75,100,150,200mm | |
Density | 6-24kg/m3 | |
Thermal conductivity | 0.02~0.03w/mk | |
Internal face | Material | ppgi |
thickness | 0..15-0.8mm | |
Thickness of zinc | 80g/m2 | |
Corrosion protection | Galvanized | |
Coating | Polyester | |
Thickness of coating | 7micron | |
Pattern | Plain | |
Shipping terms | ||
Package | Craft paper or wooded pallet | |
Delivery time | Within 5-10 days after your prepaid | |
Payment terms | T/T ,L/C at sight |
FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place
order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC
bank) and L/C are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details by email or
TM. Then we issue you an PI for your confirmation. You will be
requested to do pr -epaid full payment or deposit before we go into
production. After we get the deposit, we start to process the
order. We usually need 7-15days if we don't have the items in
stock. Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
4) How do you take care when your clients received defective
products?
A: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.
5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We
check the goods when they go into next step production procedure.
Shenyang iBeehive Technology Co., LTD.
iBeehive ENTERPRISE GROUP is one large and diversified private corporation, consisting of Liaoning iBeehive Construction Material Technology Co., LTD., Shenyang iBeehive Steel Structure Engineering Co., Ltd., Liaoning iBeehive Metal Structure Products Co. Ltd., and specializing in the consulting, design, production and construction of steel structure parts and color-coated steel plates. The products and services we can provide contain light portal steel frame, industrial workshop of heavy crane work, civil steel structure with multilayer frame, superhigh&outsize steel structure, non-standard structure parts, spheronization of less than O.D.200mm and sandblasting and tempering of structure parts, etc. The factory covers an area of 100000m2, including a construction area of 60000 ㎡ and a workshop of single largest span (24X4+21X2+15X1 )m, the length of 240m and height 18m, and the lifting capacity of 100 tons. We have more than 380 employees and an annual output of 40 thousand tons of steel construction. Since 2009, our yearly output value has reached 250 million RMB. Since its establishment in 2000, with the outstanding development experience of more than ten years, our operation Headquarters and production bases are located in China's equipment manufacturing base - New Tiexi District of Shenyang.
iBeehive ENTERPRISE GROUP, by virtue of regional advantage of the Northeast Old Industrial Base, has a large number of outstanding professionals making and executing strict standards for the quality of the products.
Excellent projects of iBeehive Enterprise mainly comprise New World Exhibition Center as a landmark, NHI, Shenyang JFMMRI Industrial Park, SMTCL, TBEA in Shenyang area, and others in other areas. And iBeehive always keeps good partnership with Chinese Metallurgical Group, China construction group, Chinese railway construction group, China Power Investment Group, Shanghai Baosteel, Shanghai General Steel Structure, Zhejiang Hengda Group, Zhejiang Seiko steel, Anhui Fuhuang steel construction group, Hubei Yangtze River and other large construction groups. To seek a breakthrough, in 2008 iBeehive extended business to special-shape and heavy rivet-solder products market, and succeeds in the industries of mining and metallurgical equipment, shield machine, railway bridges and other large projects at home and abroad.
With strong business strength, the integrity of the service concept, and awareness of social responsibility, iBeehive enterprise has widely been recognized by the government, industry, and society. iBeehive has always insisted on obtaining reputation and market by quality and nice products, the perfect combination of the first-class talent and first-class equipment is committed to becoming the R & D center of high-end steel structure industry.
Our enterprise principle is "quality first, sincere service; excelsior, mutual benefit and win-win" as business philosophy, we firmly believe that enterprise will be even more brilliant!