5T Hydraulic Uncoiler Cable Tray Roll Forming Machine With Press Machine

Technical Parameter

Raw material:Galvanized steel or blank steel
Thickness: 1.5-2.0mm
Width of the profile: 100-500mm
Height of the profile: 50-200mm
Rolling Speed: 12-15m/min
Roller Stations: About 26 stations
Roller Material: Gcr15, Quench HRC58-62 Plated Chrome
Shaft: 45# Advanced Steel (Diameter: 76mm), thermal refining
Maim Motor Power: 22 kw
Hydraulic cutting Power: 7.5 kw
Material Of Cutting: CR12 with quench treatment
Hardness: HRC58-62
Tolerance: +-1.5mm
Electric Source: 415V, 50HZ,3 phase
Control System: PLC (Panasonic) as list in the note
Weight: About 8 tons
Way Of Drive 1.5 inch chain
Size of machine Length 11000mm* Width 800mm* Height 1000m

Machine Component

1. 5 ton hydraulic De-coiler

Diameter: 460-520mm hydraulic expansion. Pictures for reference
Expansion: Hydraulic de-coiler
Capacity: 5000kg per mandrel
Max Coil Width: 1250mm

2. Leveling device

7 rolls leveling, 3 rolls up and 4 rolls down
Diameter is Ø 80mm, chrome and HRC60 heat treatment to secure the smooth surface
Leveling Raw Material thickness:1.5-2.5mm
Max Leveling Raw Material width: 1000mm
Power: 4.4kw

3. Feeding device

Feeding Servo feeding motor: about 4.4KW,Yaskawa(Japanese Brand)
Description: servo feeding can control the punching distance in precision, controlled by PLC, and the feeding tolerance can be+-0.05mm, the servo motor can control the speed, and can accept the input signal, and react quickly, and performance well, the touch screen can display the rotating speed, the length and the quantity, it can be controlled by the manual and auto modes.

4. Punching Moulds description

As for the profiles, total need 2 sets of punching moulds, when need to punching the first hole drawing, change the punching mould 1, when punching the second hole drawing, change the punching mould 2, ect. When the punching heads broke, they can be removed, and changed by the new punching heads.

Punching moulds material: Cr12Mov Quenching HRC58-62degree Shanghai NO.5 Steel (China best brand for steel)

5. Cutting:

5.1 The cutter blade material: Cr12mov HRC58-62 degree
5.2 Cutting after forming: Cut the sheet after roll forming to required length
5.3 Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
5.4 Material of blade: CR12with heat treatment
5.5 Length measuring: Automatic length measuring
5.6 Tolerance of length: 6m+/- 1.5mm

6. Out tables:

1.Length: 1.5 meters
2.Number: 2 units