W1800mm Cargo Air Shower Tunnel With Fast Speed Shutter Doors for For Forklift, Powder coated steel material

Cargo Air Shower Tunnel With Fast Speed Shutter Doors for Forklift, Powder coated steel material

Cleanroom Cargo Air Shower Tunnel With Fast Speed Scrolled Doors For Forklift

Doors: Soft PVC Fast Speed Scrolled Doors

Door Net Width: 1800mm

Description:

Air Shower Tunnel for clean room is a kind of partial clean equipment with rather strong universality and

is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters

to shower before entering the clean area. After using it, the dust could effectively be reduced to enter the

clean area and maintain the normal working status.

Blowing type: single-side blowing, double-side blowing, three-side blowing.

Features:

1. The control system run automatically by photoelectric sensor, the two door are electric interlocked.

(One door in open state, the other door must in close state. When people enter air shower, the system will

shower automatically by photoelectric sensor)

2. Air shower time from 1 to 99 seconds which can be adjustable

3. Adopt Pre filter and HEPA filter

4. The door, bottom-board, nozzles are used of stainless steel, good appearance.

5. When air shower is used to pass cargo, it is without bottom-board.

Standard Features:

1. Large Airflow and Low Noise Blower fan

2. Neoprene vibration isolator for blower

3. 99.99% 0.3 micron HEPA filter

4. Stainless Steel adjustable air nozzles

5. MEVR 7 pre-filters located at the botton of the wall for easy access

6. Electric door interlock 12DV with 50kg holding force.

7. Emergency stop station (Shutts off blower and turns off locks)

8. Commercial duty door closers.

9. LED light fixture.

10. Pre-wire control panel with non-fused disconnect switch, tranfermers, motor starter with short circuit and overload protection and fused and circuit breaker.

Optional Features:

1. 99.999% @ .12 micron ULPA filter

2. MERV 8-10 Pre-filters

3.Numeric display

4. Touchscreen display

5. Vertical laminar flow ceiling

6. Hazardous location electrical

7. Automatic door systems

8. Magnehelic gauge for HEPA filter

9. Ionization

10. Audible alarms

11. Safety glass

12. Additional emergency stop stations

13. Light switch for interior LED light

Parameter:

size and specificaton:

Air shower Details:

Drawing Of Air Shower Tunnel

Testing in factory:

All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.

Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.

Testing before shipment:

1. Appearance inspection

2. Electrical safety tests

3. Air wind speed testing

4. Function testing

Warranty:

The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.

All equipment is shipped with a comprehensive use’s manual with testing report.

Additional IO/OQ/GMP document is available upon request.

Contact our sales representative for specific warranty details or document request.

Replacement parts:

1. HEPA filter: It should be changed in half or one year once.

2. Pre filter: It should be changed in 3-6 month once.

How can I rate the efficacy of my air shower?

You can rate the efficacy of the air shower by measuring the air flow velocity at each nozzle.

Each nozzle is designed to provide up to 22-25m/s, If the measured velocities fall significantly short of 22m/s,

please check whether the HEPA filters need to be replaced.

Why you choose ZHISHENG Company ?

Professional service:

Fast reply in 12 hours if we receive any inquiry or request from customer

Familiar with equipment.

Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.

Delivery time:

• Production period:15-30days

• Shipping notice or insurance for you after the goods is shipped.

After sales service:

• We respect your feed back after receive the goods.

• We provide 1 year warranty after goods arrive.

• We promise all spare parts available in lifetime use.

• We care of your complain within 48hours.

Payment Term:

30% prepayment by T/T at order, the balance of payment before shipment.

Cleanroom equipments,like air shower, FFU. It is one-year warranty.

Dongguan Zhisheng（Lihong） Purification Technology Co., Ltd. is builded in 1997, we are specialized in manufacturing clean room equipments, like air shower, air shower tunnels, Fan Filter unit(FFU), Pass Box,  Clean Bench, Laminar Flow cabinet, clean booth, various sole cleaning machines and boot washer,  various air filters including HEPA filters, fine filters, V type filter, medium filter, pocket filters and Pre-filter and other filters,  and HVAC air diffusers, air grilles and volume control dampers.

We make our products strictly in accordance with state standards. With the top-graded product quality in the industry, our company enjoys great reputation among the customers all over the country. Our products are also exported to Europe, North America, Middle East, Southeast Asia and other countries.

Clean room equipment include air shower, clean bench, FFU,pass box, pass box with air shower, clean booth etc.

Air filters include primary, medium, HEPA filter, Replacement filter for Projector and Air Purifier.

Our HEPA filter has passed the tests of National Center of Quality Supervision and Inspection and Testing for Air Conditioning equipment.

The purifying equipment are in conformity with GB5007-2001 Design Code of Cleaning workshop. Our wide range of air purifying product will surely satisfy different engineering requirements of different purifying grades.

We also supply shoe sole cleaning machines, Hand wash stations, boot washers,wash tanks and  hygiene station machines and stainless steel products for clean room and food factories.

HVAC products include air diffuser, air grille, air louver, air damper, pressure damper, Sound absorber and other accessory parts for air-conditioners. They are widely applied in many large-scale projects and win consistent high praise of our customers because of the superior quality and delicate crafts

We develop new products for pharmacy and hospital, like dispensing room, dynamic pass box, Electric sliding door and swing door for hospital, Laminar flow air supply ceiling,drug cabinet, instruction cabinet ,Wash hand sink, Liquid crystal light and so on.

Adhering to the operation tenet of Honesty Service and Pursue Perfection, our skillful and high quality employees will produce the best and most reliable products with advanced processing equipment and excellent materials. Comprehensive and prefect after-sales services will be available to customers. We are committed to provide the best products and comprehensive services to all customers.

We have Lasing cutting machine, Bending machine, Punching machine, these new machines makes sure the good-looking and superior quality for the machines.

Our workers have been more than 10 year experience in welding , and they have good skills to make sure the quality of machine.

Besides, we have R & D team, we have 5 engineer to design and develop the new product and selove the techncial issues of the machines.

Websites: www.cleanroom-airshower.com

Email: sales@cleanroom-airshower.com; sales-guo@zsfilters.com

Whatsapp(wechat): 86-13712072567