Cardboard Carton Packing Machine Slotter Die - Cutter Inline With Folder Gluer Bundler

Cardboard Printer Slotter Die-Cutter Inline with Folder Gluer and Bundler Machine

Folding part:

1, The upper and down conveyor clamping the cardboard to move forward, the cardboard inlet interval,

as well as upper and down conveyor interval all adjusted electrically.

2, Paper entering section adopts spring pressure wheel to load cardboard, limit device is equipped in the

pressure wheel, and the interval between the wheel and down conveyor can be adjusted independently,

make sure high paper feeding precision.

3, The middle part is equipped with secondary ballast device, make sure the folding precision.

4, The back part adopts vaccum suction belt to convey cardboard, in case the cardboard slide away and

two folding parts are not joint together completely.

5,The back part is equipped with down folding belt, whose speed is faster than the upper folding belt, the

friction of the down belt movement will offset the resistance produced by folding cardboard, to reduce

problem that the two folding parts of the cardboard are not joint together completely.

6, The back part adopts rounder tower forming folding method, make the cardboard folding precision well

controlled and the forming carton box with good shape.

7, The movement of the crossbeam adjusted by electrically.

Motor part:

1, Main motor adopts variable frequency motor, synchronized with the flexo printer.

2, American Gates Timing Belt is used, with high transmission precision and low noisy.

3, Strong wind pressure device prevents the forming carton box upturned, and the wind direction can be

adjusted, make sure staking tidy.

4, High speed shaping and flapping device do the last revise to the forming carton box.

Count and discharge part:

1, Photoelectric switch counting, three units servo motors cooperated to make sure the precise counting

under high speed running, accurate and reliable batch with little impact.

2, Pneumatic paper pushing structure to push out the counted carton box neatly.

3, Back baffle can be adjusted electrically as per the cardboard width.

4, Moving parts adopts imported ball screw and linear guides with reliable stability.

5, Equipped with paper pressure device, upper and down transmission is the same speed ensures carton

box neatly, the height can be adjusted electrically as per the different quantity of each pack of the carton box.

6, The left and right position of the discharge part can be adjusted, which ensures the carton box always

falling down to the middle part of the machine.

Technical parameter(standard size):

Mechanical speed: 300 pieces/min(as per specific condition)

Main motor power: 18.5KW

Glue method: gluing

Machine length: 11.5m

Max.cardboard: 900x2000mm

Min.cardboard: 300x800mm.

CangZhou Xin-Tian Packing Machinery Co., ltd is a specialized incorporation that deals with the design and production of carton machinesand is the first one being created in the North carton machinery base in DongGuang. More than twenty years since its creation, the incrop oration is in the leading position in research, production and exploitation.The higher staffs of the incorporation listen carefully and adopt the suggestions and advices from dlients in using the national and international advanced techniques and experiences, and lay stress on the less cost, higher effciency and ecnomical and practical characteristics of products.At present, the incorportion produces various grade products the middle and high speed water-ink printing and slotting machines, to satisfy the needs of different clients.For years, our products sell well and are welcome in China, and a large amount of products have been exported to South-Korea, Russia and South-Eastern Asian countries.The Cardboard Machinery Research Institute has been established as a joint research institution of The Xin-Tian Cardboard Machinery Incorporation and HEBEI Industrial Technology University with the most advanced technology to exploit and produce the intellectual and high efficient modern technical products.

Production Shop

Our Factory's have CNC (8 pcs) ,milling ,drilling,pulse and other procesing machinery to insure produced high quality,precision spare part for our machines.

Wallboard:

We used CAST STEEL not Nodular cast steel.Shrinkage and dispersed shrinkage are not exist in cast stell but has too much in nodular cast steel. Cast stell is expensive than nodular cast steel but tough,dectile and easily machined.Even you cant see the steel's material after painting,but we used good cast steel ,to producted high quality machine is my factory's aim.That's why the machine have been using more than 20 year no problem.

Accessories

We used famous brand accessories for our machinese.

Ceritifaction

Loading

In Exhibition

Service

WHY CHOOSE US:

1.Many years expertise and professional experience in designing and manufacturing.

2.Design and customized according to customers’ requirements.

3.High levels of performance,quality and reliability of all equipments and services.

4.Reliable quality proven by customers both at home and abroad.

5.Reasonable prices without compromising any products efficiency.

6.Promptness in both equipment delivery and technical support pre-and after sales.

7, we have a professional group , every department have the professional work .