
100% Insulation Easy Handling 12.9 Cubic Environmental Walk-in Test
Chamber
Application:
Food (meat, vegetable, fruit, dairy, drink), Medicine, Chemical, Electronics.
Cold Room Construction:
1. The cold room is built by polyurethane sandwich panels, easy to
mount and to disassemble or enlarge
if necessary.
2. The panels are jointed by means of quick-action eccentric
mechanisms.
3. The external and inner panel cover is of zinc-coated
steel sheet with a plastic finish. The heat insulation is of rigid
foam polyurethane.
4. The floor panels are reinforced and they withstand distributed
load up to 2000 kg / SQ Meters.
5. The cold rooms are equipped with electric lighting. R22 and
R404A are used as refrigerants.
6. The prefabricated cold rooms are intended for cooling and
storage of perishable products
cooled or froze.
7. The cold room should be installed in a sheltered place away from
direct sunshine, dust and rain.
8. Depending on the cooling temperature °C maintained, the cold
rooms can be:- for medium temperatures from + 10°C to -5°C. for low
temperatures from -15°C to - 40°C.
9. According to the conditions of work the cold rooms are available from +5°C up to +45°C ambient air
temperature.
Our advantages:
(1) KOMEG was honored with "Top-10 Well-known brands of refrigeration equipment in China"
(2) KOMEG is one of the few companies in China who have "National quality guaranteed and Eligible product in refrigeration equipment industry ".
Main Technical Parameters:
Model | KMHW-6 | |||||||
Volume(m³) | 12.9CBM | |||||||
Interior Dimensions | W3000 x H2100 x D2050mm | |||||||
Exterior Dimensions | W4160 x H2350 x D2250mm | |||||||
Safety Devices(standard) | No fuse breaker, over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection | |||||||
Standard accessories | Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator | |||||||
Control System | Balanced Temperature & Humidity Control System | |||||||
Refrigeration system | Water Cooled | |||||||
Semi-hermetic compressor, single stage or cascade refrigeration system, | ||||||||
CFC free refrigerant ( HFC-507 and HFC-23 ) | ||||||||
Controller | Panel | 7-inch LCD Touch panel, Chinese or English display selectable | ||||||
Operation model | Program or fix point running | |||||||
Memory capacity | 120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles | |||||||
Accuracy | Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit | |||||||
Input | Temp.: pt-100, Humidity: pt-100 or ~5V DCV | |||||||
Comm.port | RS-232 or RS-485 ( Softawre is option) | |||||||
Temp. range | Maximum: 80 ºC,120 ºC; Minimum: -60 ºC, -50 ºC, -40 ºC, -30 ºC, -20 ºC, -10 ºC, 0 ºC | |||||||
Humidity Range | 10%, 20%, 30% ~ 95% | |||||||
Temp. constancy | ±0.5 ºC | |||||||
Humidity constancy | ±2.5%R.H | |||||||
Temp. uniformity | ±2.0 ºC | |||||||
Humidity uniformity | ±5.0%R.H | |||||||
Ambient Temp. | +5 ºC~+35 ºC | |||||||
Wiring method | AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires | |||||||
Heat up time | +20 ºC~+80 ºC, Within 60 min | |||||||
Pull down time | +20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min | |||||||
Interior material | Stainless Steel Plate(SUS 304) | |||||||
Exterior material | Baked Painting Steel Or Stainless steel ( SUS304) | |||||||
Insulation material | Rigid polyurethane foam | |||||||
Door size (mm) | Single wing: W800 x H1800; Double wing: W1600 x H1800; | |||||||
Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available |
Walk-in Room Show
Installing the Walk-in room
KOMEG Technology Ind Co., Limited
ABOUT KOMEG
Founded in 1990, dedicating in environmental test equipment for over 30 years, KOMEG Technology lnd Co., Limited, is famous for its KOMEG star brand of environmental test equipment in China and overseas.
KOMEG specialize in climatic test chambers, temperature humidity test chambers, thermal shock test chambers, walk-in chambers, aging test chambers and burn-in room, drying ovens, Altitude test chamber, salt spray testers, and medical laboratory equipment, etc. During the past decades, KOMEG cooperated with and served many enterprises like Gree, Konka, Samsung, LG, Hiconiecs, BYD, Magna International, TOYOTA, Amicell, Stankomet, Premier, Hitek, UL, SGS, Intertek, etc.
KOMEG factory is located in Dongguan Songshan Lake, National Hi-Tech Industrial Development Zone, covering an area of 5, 000 sqm, with over 100 skilled employees including 30+ R&D engineers. (40 minutes from Shenzhen Baoan Airport by car; and 90 minutes from Guangzhou Baiyun Airport by car)
KOMEG also has branch office in Shenzhen.
Our Philosophy
Born for quality, test for future.
Our Aim
Better idea, better design and better quality.
KOMEG keep striving for continuous innovation, releasing no less than 5 new designs each year.
Our strong R&D team and skilled engineers and workers are the key factors for our success.
No matter standard models or customized project, we have rich experience to realize customers' requirements, so that our customers worldwide can benefit more from us when working with Komeg.
Ensure to meet your specific test standards, all key components and parts are imported famous brand from all over the world.
Thats why Desay( Apples' battery supplier, KONICA MINOLTA, SENKO,
Midea, TCL and Huawei are also among our long-term clients. With
KOMEG top brand strength, renowned reputation domestic and
overseas, our products are widely exported to Europe, America,
Southeast Asia, Africa, Oceania, etc. countries like
Russia, Germany, Korea, Singapore, Brazil, etc.
Distributors welcomed, Inquire today to get your order started.