Vertical Design Table Top Temperature Test Chamber with Multifunctional Controller

※ Desk type chamber is optimized to save space while offering a wide test area, relatively light weight allows setup almost everywhere.

※ Full variation to select from 3 temperature ranges (0℃, -20℃, -40℃), and standard volumes (27L and 80L) for selection to fulfill customers’ applications.

※ Cable port is available on both left and up side to allow wiring for power on testing samples.

※ Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions, optional viewing window is available in left side of chamber.

※ Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel with excellent heat resistance and easy to clean.

※ Touch screen controller HL-1000 is designed to save chamber programming and setup time with temperature limit and alarm to protect your product.

※ Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.

※ RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.

※ Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.

※ Left side of chamber with diameter 50mm cable port for power-on test.

※ Optional electronic humidity sensor is used on all test chambers for precision humidity measuring and minimal maintenance.

Desk type chambers are suitable for testing small parts, such as semiconductor, computer components, automobile sensors and cellular phone parts.

These chambers combine excellent performance with compact design that is perfect for search and development or personal point-of-use testing.

They also can offer flexibility, uniformity and control accuracy required for cost effective testing. Available in several sizes, desk type chambers allow you to cost effectively and select exact chamber that best meets your environmental test conditions.

QTS-27 Series Products Conform Following Standards:

※ IEC60068-3-5-2002 Environmental testing Part 3-5 Support documentation and guidance-Confirmation of the performance of temperature chambers

※ IEC6068-3-6-2002 Environmental testing-Part 3-6 Supporting documentation and guidance – Confirmation of the performance of temperature/humidity chambers

※ IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method

※ IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method

※ MIL-STD-202F (GJB360.8-87) High temperature life testing

※ MIL-STD-810D (GBJ150.3) High temperature method

※ MIL-STD810D (GBJ150.4) Low temperature method

※ IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method

※ IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method

※ MIL-STD-810D (GJB150.9-93) Moist heat testing method

Optional Accessories:

※ Cable Port
Size of cable port is available for Ф100mm
※ Water Purifier RO: 80
Continuously provide purified water for humidifying heater and wet-bulb
※ Dehumidifier
The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (10℃, 15%RH) for electrostatic reliability tests.
※ Defrosting Device
The chamber automatically detects and melts the frost on the evaporator when operating below 0℃ in order to allow continuous operation.
※ Electronic Humidity Sensor
Precision Humidity Sensor with stainless steel protection tube

Specifications:

Note: 1, The performance values are no specimen inside the test area.
2, At 20℃ ambient temperature, relative humidity 65%rh, rated voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.

Dear Visitor:

Thanks a lot for you browse our official website: www.sinowon.com firstly.
We, Sinowon Innovation Metrology Manufacture Limited is one of China authorized hi-tech manufacturer of metrology instrument verified by ISO9001:2015, we are focusing to research, develop, manufacture and export the optical measurement instruments and hardness testing machines since year 2006. We have already delivered and installed more than 10,000pcs of instruments to more than 5000 customers in more than 60 countries and regions, more and more international famous manufacturers choose us as the qualified supplier of quality control machines, and our service engineers have already visited USA, Canada, Mexico, Germany, Holland, France, Poland, Hungary, Czech, Turkey, Korea, Malaysia, Thailand, Philippine, Viet Nam, Singapore, Austria, India to install our instruments at customers’ site.

In the past 12 years, we concentrate ourselves to manufacture the instrument of quality control and never change our business field. We improve the quality and accuracy every year, up to now, it is 1.4+L/200um about the accuracy of our AutoVision vision measuring machine and it is 0.5HRC about the accuracy our iRock Rockwell hardness tester. Because the high quality of ultrasonic hardness tester SU-300 family, the national standard organizations SAC/TC 183 had invited us to make China national standard, the new standard: GB/T34205-2017 and JJF14306-2013 make more customers choose this NDT method: UCI to control the hardness of products.

As a manufacturer of quality control instruments, it is very important on own quality control system. In order to supply the stable quality products, we spent a lot of time and investment for staff training and quality system establishment and improvement every year, we also invest a lot of money to equip the international brand new coordinate measuring machines, roughness testers, humidity and temperature chambers, laser machines, glass scales, gauges and blocks for our own quality control. At the same time, Sinowon has been verified by ISO9001 quality management organizations every year, and our products have been issued by CE certificate for European market and Ghost certificate for Russian market.

The industry 4.0 is coming, we have already been ready for the challenge. Your request of precision is our mission forever, and we will supply the timely and warm-heart support and service as usual.
Let us work together, success together.
Thanks a lot again

Marshall Zheng Chunping
Managing Director
Nov. 1, 2018

Scan to Visit Sinowon Mobile Site