Programmable High Low Temperature Three Zone Thermal Shock Test Chamber
Meet the following standards:
1.GB/T2423.1-1989
2.GB/T2423.2-1989
3.GB/T2423.22-1989
4.GJB150.5-86
5.GJB360.7-87
6.GJB367.2-87 405
7.SJ/T10187-91Y73
8.SJ/T10186-91Y73
9.IEC68-2-14
10.GB/T 2424.13-2002
11.GB/T 2423.22-2002
12.QC/T17-92
13.EIA 364-32
Main Usage:
Programmable High And Low Temperature Thermal Shock Chamber Price
are used for “temperature shocking” a product under test. Usually a
Thermal Shock Chamber consists of two chambers, one hot and another
cold, with a test basket (which contains the product being tested)
which moves between the two chambers (or zones) – either
horizontally for vertically, depending on the configuration of the
thermal shock chamber. This equipment is the perfect testing
machine of electronic components, metal, chemical materials,
automation components, communication module, national defense
industry, aerospace industry, BGA, PCB substrate, electronic chip
IC, semiconductor ceramic and high polymer materials.
Characteristics:
1. The most advanced new and Euramerican explosion-proof handle,
perfect modelling design, high texture appearance.
2. Programmable High And Low Temperature Thermal Shock Chamber
Price using large human-computer touch conversational LED
man-machine interface controller, simple operation, easy to learn,
it is stable and reliable.
3.The way of shock is changing the wind grid to pull the cold and
hot temperature into testing area to enforce test.
4.Shocking time:0.1~999.9h; cycle period:1~9999times, settable.
5.Cycle and defrost ing count can be set, so does automatic
defrosting or manul defrosting.
6. Programmable High And Low Temperature Thermal Shock Chamber
Price shows the the status and curve when working together with
explaination and eliminateing method when stoppage.
7. Euramerican imported efficient repeated compressing freezing
unit, low noise, energy saving.
8. Programmable High And Low Temperature Thermal Shock Chamber
Price adopts PID automatic calculating control, high precision of
temperature control.
9. Can make automatic cycle shock or manual selective shock and can
choose two groove or three groove cold , heat shock.
10. Can use as a high temperature boc or low temperatue box
independently.
11. Programmable High And Low Temperature Thermal Shock Chamber
Price Use environmental refrigerants R404,R23 whitch cause no
poluution to the ozone.
Specifications:
Inner Size(mm) | 400×350×300 | 400×500×400 | 500×600×500 | 500×750×600 |
Temperature Range | High temperature chamber:RT~+150°C Low temperature:RT~-60°C | |||
Temperature Deviation | Less than ±2°C | |||
Temperature Conversion Time | Less than 10S | |||
Temperature Recovery Time | Less than 5min | |||
Material | External material: SUS#304 Stainless steel plate Internal material:SUS#304Stainless steel plate | |||
Cooling System | Water-cooled or air-cooled,Taikang compressor in France,environment friendly refrigerant | |||
Controllor | Programmable temperature controllor imported from Japan | |||
Temperature Sensor | PT 100 *3 | |||
Setting Range | TEMPERATURE : -100.00+200.00°C / TIME : OH1M ~ 9999H 59M / CYCLE ~ 10000 CYCLE | |||
Resolution | TEMPERATURE : 0.01°C / TIME : 1 MIN | |||
Output Mode | PID + PWM + SSR CONTROL METHOD | |||
Simulated Load IC (KG) | 3.5kg | |||
Standard Accessories | Cable hole, lighting equipment | |||
Cooling System | Water-cooled/air-filled type | |||
Power | AC380V/50HZ Three-phase four-wire ac power | |||
Additional Features | The outlet and return it checks for taste known control/CM BUS (RS-485) remote monitoring management system/ Ln2 liquid nitrogen rapid cooling control device | |||
Remarks | It can be customiazed according to customer demands. Technology index refer to product description.Delivery time within 45days. | |||
Specifications of controller:
Group | Specification | |||
Display | Display | 7.5” TFT-LCD | ||
Screen Resolution | 640(W) x 480(H) | |||
Language | KOR/ENG/CHN, KOR/ENG/JPN | |||
Start Page | Support user’s start page | |||
User Screen | 16 customized user screen for screen saver | |||
Mount Method | Panel mount, VESA mount(MIS-D 75) | |||
Control Mode | 1 Channel control | |||
Max Channel | 1 Channel | |||
Pattern & Pattern Type | 120 Pattern / 6 Type, Max 999Hour 59Min 59Sec can be set | |||
Input | Thermocouple | K, J, E, T, R, B, S, L, N, U, W, PL, C, | ||
Output | Control Output | SSR, SCR | ||
Current Output | 4~20mA DC(Load Resistance : Max 600Ω) | |||
Voltage Output | 24V DC(Pulse width : Min 5ms) | |||
Transmission Output | High Temperature PV, Low Temperature PV, Experiment PV | |||
Digital | Contact Type | RUN/STOP/HOLD/STEP by DI, Pattern Number, Delay time of detecting DI error, Trouble Input by DI, Available to customize DI error | ||
Contact capacity | Max 12V DC, 10mA | |||
Digital Output | Relay | C contact | Normal Open 30V DC 1A, 250V AC 1A Normal Close 30V DC 1A, 250V AC 1A | |
A contact | Normal Open 30V DC 1A, 250V AC 1A | |||
Open Collector | ON voltage across contacts at less than 2V, the leakage current less than 100㎂ | |||
Sampling Time | 500ms | |||
Accuracy | ±0.1% + 1 digit of Full Scale | |||
PID Control | PID Group | Total 4 group(PID 3 group + deviation PID 1 group) | ||
PID Type | Zone PID | |||
Communi cation | Interface | Flexible to change between RS485/RS232C by Dip switch, Max. 31 nodes | ||
Protocol | PC Link, PC Link(Checksum), MODBUS RTU, MODBUS ASCII | |||
Speed | Max 115,200 bps, Support Ethernet | |||
Data Back-up | Object | SD Card, SDHC Card (FAT32 format) | ||
Functions | Back-up and restore data of Program Pattern / Parameter Settings, and High Temperature PV,SP/ Low Temperature PV,SP/ Experiment PV,SP value | |||
Power Supply | Power | 24VDC | ||
Power Consumption | 22VA Max | |||
Operating environment | - | |||
Weight | 1.65 kg | |||
Dongguan Liyi Environmental Technology Co., Ltd.
Dongguan Liyi Environmental Technology Co., Ltd. is a high technology supported production-oriented enterprise who specializes in developing, manufacturing,marketing all kinds of environmental equipment. Our company has advanced technology, experienced technical management personnel and efficient professional service staffs, fine quality management and perfect after-sales service system.
To strengthen the quality awareness,perfect management system,improve product credit,meet customers increasing requirements, our company brought into ISO9001:2015 international quality management system and obtained the certificate: N0006997-1.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
